VDROP/VDROOP PENCIL MOD FOR ASUS P5K-V & VM

Here is a VDROP/VDROOP PENCIL MOD DETAILS for Asus P5K-V and VM as well. I would suggest doing it ONLY if you are experiencing a good amount of VDROP/VDROOP. Do it at your own risk and if something goes wrong i wouldn't be held responsible for that. Though this worked perfectly for me. If you haven't read the article OVERCLOCKING Q6600 WITH ASUS P5K-V, just do so before applying this mod.


Take any #2 pencil and fill the area of the respective resistor from one end to the other. This procedure is completely reversible in case you don't need it anymore. Don't forget to blow off the extra graphite after finishing the MOD. Above picture shows (green circle) the area where you need to look at and the below picture is the close up of that area. Resistors you need to fill in for VDROP and VDROOP are marked with GREEN and BLUE respectively.

DISCLAIMER
Overvolting and Moding any component carries a high risk of damage and/or failure. I take no responsibility for any loss or damage to your components as a result of using this MOD. You should do it at your own risk.